Golfsmith's Fair-Way: Try Before You Buy, Low Price Guarantee, Custom Fitting, Bring It Back.
November Free Shipping over $99
November Free Shipping over $99

Clubmaker Clubmaker Multi Purpose Bench Vise

 

 
 
 
 

Style# 30026468

Shipping: 

† Excludes Taxes and Shipping Costs

 
 
 
Clubmaker Multi-Purpose Bench Vise

This handy bench design features a 180° swivel base to help clubmakers easily perform a variety of clubmaking tasks. The tool comes with four interchangeable jaws — soft aluminum V design for steel shafts, rubber V design for graphite shafts, round rubber jaws for gripping and clamping and flat jaws for irons and other jobs. This bench vise also features a built-in ferrule setter and extractor to help clubmakers multitask.

A solvent recovery tank and bracket (#8322) speed up the gripping process.

Instruction manual (1Mb)

Specifications:

  • Jaw width: 75mm (3")
  • Throat opening: >75 mm
  • Bench to Top Height: >125 mm (5")


Online Shipping Information

Golfsmith.com offers simple, flat-rate shipping to destinations in the continguous U.S. via FedEx.

  • Ground (3-5 business days)
  • 2-Day Air
  • Overnight
  • $6.99
  • $13.99
  • $21.99

Our policy is to strive for the best possible combination of price and service for your shipment.

In order to better serve our guests, we will occassionally offer discounted shipping promotions. Any shipping discounts will be applied in your shopping cart.

“Overnight” shipments will arrive the next business day (excluding weekends and holidays) after departing Golfsmith. “2-Day Air” shipments arrive in two business days after departing Golfsmith. On-time delivery for both methods is guaranteed by FedEx. Shipping delays may occur during busy Holidays or in the spring -- we will do our best to accommodate last minute and expedited orders placed during these times.

Most orders are shipped within 48 hours of online placement. Orders must be placed by 9am (CST) Monday-Friday in order to be eligible for that day's “Overnight” or “2-Day Air” shipments. Orders for residential delivery placed on Sunday or Monday will not be shipped until Tuesday and orders for business delivery placed on weekends will not ship until Monday, so please take this into consideration when specifying expedited shipping requests.

Online Shipping Information
Additional Shipping Information
Sales Tax details
International & Canadian Orders

Overall Rating

You May Also Like:
 

Ratings and Reviews for the Clubmaker Clubmaker Multi Purpose Bench Vise

Write a Review for the Clubmaker Clubmaker Multi Purpose Bench Vise
Rated 3.3 out of 5 by 3 reviewers.
Rated 1 out of 5 by Missing Screw When unit arrived it was missing a screw that attaches the jaws to the vise face. No support at all, had to replace the screw at my own inconvenience and expense. June 15, 2014
Rated 4 out of 5 by Great product The vise is as advertised: Easy to install and incredibly easy to use. Holds clubs very firm for re-gripping without any danger to the club shaft. Makes re-gripping a snap from stripping the old grip and adhesive to pushing on the new grip. Cut my time in half over the older vise I used to use. September 10, 2012
Rated 5 out of 5 by Necessity for Clubmaking This is a great little vise for the money. Comparable in quality and price (if not cheaper) to any other vise I've seen of the same size, and you get these phenomenal jaws with this vise! These special jaws really are great; one rubber set for regripping (larger diameter to grip butt end of shafts), one rubber set for clubhead changing (smaller diameter to grip shaft tips), one aluminum one for holding steel shaft tips (although the rubber one would work fine here too), and then the standard steel jaws for regular work. Plus the aluminum backing plates (with built in ferrule tools). If anyone was wondering how the jaws interchange, the standard steel jaws and aluminum backing plates both bolt on with counterbored allen screws. The aluminum backing plates have two little pins sticking out of each, and the other three sets of jaws have holes drilled in the back of them which fit snug over the pins. August 24, 2007
Reviews: 1-3 of 3
 

Didn't Find What You Were Looking For?

Customers Who Viewed This Item Also Bought: